[back]LINKOH 8 Ports Unmanaged 10/100/1000M PoE Switch
|
|
| 8 Ports Gigabit PoE Switch |
Model No.: LK3310-8P2G
◆ 8*10/100/1000M PoE Ports+2*10/100/1000M Ethernet Ports
◆ Realtek main chipset+ TI PoE-PSE chipset
◆ Port 1 support 60W Hi-PoE output; port 2~8 up to 30W
◆ Plug-and-Play design
|
|
LINKOH LK3310-8P2G is an ideal Plug and Play, Power over Ethernet solution which provides quick installation and unmanaged VLAN mode to improve work efficiency It is equipped with 8 10/100/1000BASE-T ports with first port 60W and other ports taking up 30 watts of PoE+ power and 2 Gigabit Ethernet interfaces with inner power system. With a total PoE+ power budget of 120 watts and non-blocking data switching performance, the LK3310-8P2G can fulfill the demand of sufficient PoE power for HD IP surveillance. It offers a desktop-sized, reliable and visible power solution for small businesses and system integrators deploying Power over Ethernet networks.
|
Realtek main chipset+ TI PoE-PSE chipset
Standard PoE PSE chip switch works much more stable and can be compatible with different brand PD devices
Support PoE function for various application
Port 1 supports 60W Hi-PoE output; suitable for some super high PD devices, like outdoor wireless AP, PTZ cameras etc
port 2~8 support standard AF/AT PoE output.
Plug-and-play design
LK3200-16P3GC is a plug-and-play design switch, there is no need to do any configuration before application. Only need to connect the switch with differnet equipments and power on, the switch will start to work. It is a end-user friendly design multi-ports switch
LED Indicator for problem analyzing
The LED indicator at the front panel can show the working status of the switch. By analyzing the indication status can understand the switch works normally or not. If There is a problem occurs, can understand where is the problem.
|
|
Model
|
LK3310-8P2G
|
|
Copper Ports
|
10 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
|
|
PoE Ports
|
8-802.3af/802.3at PoE Injector Ports
|
|
Switch Architecture
|
Store-and-Forward
|
|
Switch Fabric
|
20Gbps/non-blocking
|
|
Throughput
|
14.88Mpps @64 bytes
|
|
Address Table
|
2K entries
|
|
Share Data Buffer
|
2.5Mb
|
|
Jumbo Frame
|
9600 Bytes
|
|
Flow Control
|
IEEE 802.3x pause frame for full-duplex, Back pressure for half-duplex
|
|
PoE Standard
|
IEEE 802.3.af/at/ Hi-PoE, Port 1 support 60W output, port 2-8 support up to 30W output
|
|
Power Supply
|
100～240V 50-60Hz 1A 130W
|
|
Power Consumption
|
Less than 8W when PoE doesn’t work
|
|
LED Indicators
|
Power: Green
Solid on- power work normal, off- power disconnected, blink- port short circuit or current over-load
10/100/1000 T RJ45 Interfaces (Port 1 to Port 4):
LINK/Data (Green)
Solid on- port connected, blink- port connected with data transmission.
PoE (Yellow),
Solid on- PoE works normally, off- PoE doesn’t work
10/100/1000RJ45 (Port 5-Port 6):
LINK/Data (Green)
Solid on- port connected, blink- port connected with data transmission.
Speed(Yellow)
10/100/1000M- Solid on; off- doesn’t work or speed is 10/100M
|
|
Certification
|
CE mark, commercial；CE/LVD EN60950；
FCC Part 15 Class B；RoHS；
|
|
Dimension
|
210x140x45mm
|
|
Weight
|
1.1kg
|
|
WorkingTemperature
|
-10 ℃to 45℃
|
|
Storage Temperature
|
-20℃ to 70 ℃
|
|
MTBF
|
50,000hrs
|
|
|
Sorry,no more!
|
Sorry,no more
|
| |
